Scooter w/ Windshield WeatherFit® Basic Scooter Cover

The front of your scooter cover is marked by a tag or logo. Secure the front of the cover around the scooter's front tire(s), then unroll the cover over the top of the scooter and secure the opposite end of the cover around the back tire(s). Make sure not to snap or rip the cover on any sharp points. To help extend the life of your cover, we recommend reinforcing the inside of the cover at areas exposed to severe abrasion, using cloth-reinforced duct tape or vinyl tape. Use care when installing the cover on a scooter which has just been driven to be sure the material does not come in contact with hot exhaust pipes.

Use the following procedure to remove the cover in about a minute:

1. Ensure the cover is dry and free of debris to prevent mold or mildew
2. Release both ends of the cover from under the tires
3. Fold up both sides onto the top of the scooter into a strip approximately 2 feet wide
4. Roll the cover from front to rear, or vice versa

The performance of your WeatherFit® Basic scooter cover can be affected by contaminant (dirt, dust, etc.) build-up. Washing your scooter cover correctly will help it maintain its water resistant properties and also increase the service life of your cover. Use the following procedure to clean the WeatherFit® Basic fabric:

1. Place the cover in a large commercial front load washing machine
2. Use mild powder detergent (dissolve first), NEVER use bleach or fabric softener
3. Wash the cover using a gentle cycle with water temperature set to cold
4. Rinse the cover twice (2x) with water only to remove all the cleaning detergent
5. Air dry the cover, DO NOT place the cover in a dryer

You may also clean your cover on your scooter using the following procedure:

1. Use a soft bristle brush to wipe away any loose dirt and spray with a water hose
2. Mix one ounce (1oz) of Simple Green cleaner, or similar non-toxic formula, per quart of warm water
3. Spray or sponge the mixture onto the cover
4. Allow the cleaning mixture to soak into the fabric
5. Rinse thoroughly with plain water until there are no suds on the cover
6. Air dry the cover, DO NOT place the cover in a dryer

We offer FREE shipping on all orders over $50 shipped within the contiguous United States. Most orders are shipped within 24 hours after they are placed. Orders going to a physical home or business will be shipped via UPS or FedEx and generally arrive between 2-4 business days. Expedited shipping options, such as UPS Next-Day, are available at an additional cost and will be reflected at checkout.

Shipments to Alaska, Hawaii, P.O. Boxes, and military bases will be shipped using USPS Parcel Post. Any additional costs associated with shipping to these addresses will be reflected upon checkout. Please allow 1-2 weeks for delivery.

Orders to Canada are also eligible for FREE ground shipping and usually arrive within 7-10 business days. Canadian customers are responsible for paying all duties, taxes, and brokerage fees imposed by the Canadian government upon receipt of shipment. These fees are not determined until the shipment crosses the border; therefore, these charges are the responsibility of the recipient. Any returned shipments for failure to pay these duties, taxes, or brokerage fees will result in a 20% restocking fee minus any applicable return shipping costs.

Our return & exchange policy is designed to ensure our customers are completely satisfied with their purchase. If you're not satisfied with your purchase, contact our team or use the resources on our website so we can address any concerns you have about your purchase.

CoverAnything guarantees that the WeatherFit® Basic scooter cover you order will (1) arrive in new condition, (2) be free of defects, and (3) cover the scooter for which it was ordered. If your item does not fit these criteria, you must contact us within 30 days of purchase to initiate a return or exchange. After 30 days we are unable to process returns or exchanges. Any defects or damage reported to us after the initial 30 day return period will be processed as a warranty claim. Any and all issues related to how the cover fits must be addressed in the initial 30 day return period and cannot be remedied by a warranty claim.

WeatherFit® Basic scooter covers are protected by a 3-Year Limited Consumer Warranty. CoverAnything warrants, to the original purchaser, that the WeatherFit® Basic product is to be free from defects in material and workmanship for the prorated periods listed in the warranty details. Any WeatherFit® Basic scooter cover deemed defective will be replaced on a prorated schedule based on the invoiced price of the product, not to include shipping, handling, or any other fees. Retailer receipt or proof of purchase must be presented for any warranty transaction. Please keep your receipt and any tags removed from your product. The warranty is effective from the date of the initial retail purchase. Please review and understand all additional return, exchange, and/or warranty terms and conditions.