Ultra'tect® Car Cover

The front of your car cover is marked by a tag or logo. If your cover is equipped with mirror pockets, place the pockets over the side mirrors first. Secure the front of the cover around the vehicle's front bumper, then unroll the cover over the car and secure the opposite end of the cover around the back bumper. Some vehicles have very sharp bumpers, hood ornaments, or moldings. To help extend the life of your cover, we recommend reinforcing the inside of the cover at areas exposed to severe abrasion, using cloth-reinforced duct tape or vinyl tape. Use care when installing the cover on a vehicle which has just been driven to be sure the material does not come in contact with hot exhaust pipes.

Use the following procedure to remove the cover in about a minute:

1. Ensure the cover is dry and free of debris to prevent mold or mildew
2. Release both ends of the cover from under the bumpers
3. Fold up both sides onto the top of the vehicle into a long strip approximately 2 feet wide
4. Roll the cover from front to rear in 3 foot increments, or vice versa

If your car cover does not come with an antenna pocket sewn into the cover and your vehicle has an outside radio antenna that will not retract flush with the vehicle's body, then you'll have to create an opening in the cover. We have included a non-corrosive plastic grommet set to reinforce the antenna opening. To make the most accurate antenna grommet opening, remove the antenna first and install the cover on the vehicle, making sure it is properly aligned and positioned. Using a sharp pencil, punch a hole through the fabric at the antenna location. Use sharp scissors to make the hole opening 3/4 inch in diameter. Place the cover on a clean hard surface, position the inside grommet through the opening you made and then snap the outside grommet in place using a rubber mallet. DO NOT use excessive force or the grommet can be damaged.

Semi-custom and universal covers include an adhesive backed antenna patch that can be used instead of installing a grommet. After using a sharp pencil to punch a small hole through the fabric at the antenna location, simply place the adhesive backed patch over the newly created hole for additional reinforcement, and that's all there is to it.

The performance of your Ultra'tect® car cover can be affected by contaminant (dirt, dust, etc.) build-up. Washing your car cover correctly will help it maintain its water resistant properties and also increase the service life of your cover. Use the following procedure to clean the Ultra'tect® fabric:

1. Place the cover in a large commercial front load washing machine
2. Use mild powder detergent (dissolve first), NEVER use bleach or fabric softener
3. Wash the cover using a gentle cycle with water temperature set to cold
4. Rinse the cover twice (2x) with water only to remove all the cleaning detergent
5. Air dry the cover, DO NOT place the cover in a dryer

You may also clean your cover on your car using the following procedure:

1. Use a soft bristle brush to wipe away any loose dirt and spray with a water hose
2. Mix one ounce (1oz) of Simple Green cleaner, or similar non-toxic formula, per quart of warm water
3. Spray or sponge the mixture onto the cover
4. Allow the cleaning mixture to soak into the fabric
5. Rinse thoroughly with plain water until there are no suds on the cover
6. Air dry the cover, DO NOT place the cover in a dryer

We offer FREE shipping on all orders over $50 shipped within the contiguous United States. Most orders are shipped within 24 hours after they are placed. Orders going to a physical home or business will be shipped via UPS or FedEx and generally arrive between 2-4 business days. Expedited shipping options, such as UPS Next-Day, are available at an additional cost and will be reflected at checkout.

Shipments to Alaska, Hawaii, P.O. Boxes, and military bases will be shipped using USPS Parcel Post. Any additional costs associated with shipping to these addresses will be reflected upon checkout. Please allow 1-2 weeks for delivery.

Orders to Canada are also eligible for FREE ground shipping and usually arrive within 7-10 business days. Canadian customers are responsible for paying all duties, taxes, and brokerage fees imposed by the Canadian government upon receipt of shipment. These fees are not determined until the shipment crosses the border; therefore, these charges are the responsibility of the recipient. Any returned shipments for failure to pay these duties, taxes, or brokerage fees will result in a 20% restocking fee minus any applicable return shipping costs.

Our return & exchange policy is designed to ensure our customers are completely satisfied with their purchase. If you're not satisfied with your purchase, contact our team or use the resources on our website so we can address any concerns you have about your purchase.

CoverAnything guarantees that the Ultra'tect® car cover you order will (1) arrive in new condition, (2) be free of defects, and (3) cover the car for which it was ordered. However, due to the made-to-order and custom nature of the product, returns and exchanges are not possible. In the unlikely event a Ultra'tect® cover arrives damaged or defective, a warranty claim should be filed via the manufacturer's guidelines. For any size or fit issues, you will be directed to the manufacturer for resolution.

Ultra'tect® car covers are protected by a 6-Year Limited Consumer Warranty. CoverAnything warrants, to the original purchaser, that the Ultra'tect® product is to be free from defects in material and workmanship for the prorated periods listed in the warranty details. Any Ultra'tect® car cover deemed defective will be replaced on a prorated schedule based on the invoiced price of the product, not to include shipping, handling, or any other fees. Retailer receipt or proof of purchase must be presented for any warranty transaction. Please keep your receipt and any tags removed from your product. The warranty is effective from the date of the initial retail purchase. Please review and understand all additional return, exchange, and/or warranty terms and conditions.